Back Up Lamp Switch Removal and Installation: Installation

Reference: BACK UP LAMP SWITCH INSPECTION 

1. Apply oil to new O-ring (1) and tighten back up lamp switch (2) to specified torque.

   Tightening torque 

   Back up lamp switch (a): 19 N.m (1.9 kg-m, 14.0 lbf-ft) 

   Fig 1: Identifying Back Up Lamp Switch

   Courtesy of SUZUKI OF AMERICA CORP.
2. Connect back up lamp switch connector.
3. Install air cleaner assembly. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
4. Install battery and tray with ECM. See ENGINE CONTROL MODULE (ECM) REMOVAL AND INSTALLATION .