Differential Disassembly and Reassembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

Support differential case with soft jawed vise and remove final gear bolts then take out final gear.
Remove left bearing (2) using puller (1) and hydraulic press.

Fig 1: Removing Left Bearing Using Puller And Hydraulic Press
Courtesy of SUZUKI OF AMERICA CORP.
Remove right bearing (1) using special tools
Special Tool
1. 09913-65135
2. 09913-85230
  
  Fig 2: Removing Right Bearing Using Special Tools
  Courtesy of SUZUKI OF AMERICA CORP.
Remove differential pinion shaft (3) pin using special tool and hammer and then disassemble components parts.
Special Tool
1. 09922-85811
  
  Fig 3: Driving Out Differential Pinion Shaft Pin Using Special Tool And Hammer
  Courtesy of SUZUKI OF AMERICA CORP.