LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi SE, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostics Information and Procedures >> Warning Light Check >> ESP® Warning Light Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ESP® Warning Light Check

  1. Push engine switch to change the ignition mode of keyless push start system to "ON".
  2. Check that ESP® warning light (1) comes ON for about 2 seconds and then goes OFF.

    If ESP® warning light never light up, go to ESP® WARNING LIGHT DOES NOT COME ON AFTER PRESSING ENGINE SWITCH TO CHANGE THE IGNITION MODE OF KEYLESS PUSH START SYSTEM TO "ON" . If ESP® warning light remains ON and no DTC is stored in ESP® control module, go to ESP® WARNING LIGHT COMES ON STEADY .

    Fig 1: Identifying ESP Warning Light
    G06526592Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals