LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Repair Instructions >> Front Stabilizer Bar/Front Stabilizer Bar Joint Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Stabilizer Bar/Front Stabilizer Bar Joint Removal and Installation: Removal

  1. Hold ball stud of each front stabilizer bar joint (1) using hexagon wrench, remove front stabilizer bar joint nut (2) and remove front stabilizer bar joint.
    CAUTION: Do not cause damage such as scratch to ball stud boot of front stabilizer bar joint.
  2. Remove front suspension frame, see FRONT SUSPENSION FRAME REMOVAL AND INSTALLATION .
    Fig 1: Identifying Front Stabilizer Bar Joint And Front Stabilizer Bar Joint Nut
    G06529918Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove front stabilizer mount bracket, front stabilizer bar mounts and front stabilizer bar.
  4. Remove front stabilizer bar mount from front stabilizer bar.
scientia non olet · About LEMON Manuals