P/S Warning Light Remains ON Steady after Engine Starts: Troubleshooting
DIAGNOSTIC PROCEDURE CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "EPS System Check" performed? | Go to Step 2. | Go to P/S SYSTEM CHECK . |
| 2 | P/S control module power supply circuit and ground circuit check
Are they in good condition? |
Perform TROUBLESHOOTING FOR LOST COMMUNICATION . | Repair or replace defective part. |
NOTE:
Perform the following items after completion of check and repair.
- Connect every P/S system component and check if installed securely.
- Recheck system to see there is no error, see P/S SYSTEM CHECK .