Rear Side Impact Sensor Removal and Installation: Installation

Reference: REAR SIDE IMPACT SENSOR INSPECTION 

1. Check that none of the following faulty conditions exists.
   • Bend, deformation or rust on quarter inner panel.
   • Foreign material on sensor.
2. Align mounting pin (1) to mounting hole (2) of vehicle to install rear side impact sensor (3) securely.
3. Tighten rear side impact sensor bolt to specified torque.

   Tightening torque 

   Rear side air bag bolt (a): 9 N.m (0.9 kg-m, 6.5 lbf-ft) 

4. Connect rear side impact sensor connector securely.
   Fig 1: Identifying Rear Side Impact Sensor And Bolt

   Courtesy of SUZUKI OF AMERICA CORP.
5. Install bolster. Refer to REAR BOLSTER REMOVAL AND INSTALLATION
6. Install rear seat. Refer to REAR SEAT COMPONENTS
7. Enable air bag system. Refer to ENABLING AIR BAG SYSTEM