Rear Side Air Bag (Inflator) Module Removal and Installation: Installation

Reverse removal procedure, noting the following points.

• Lock connector for air bag (inflator) module securely.
• Close cap.
• Tighten rear side air bag (inflator) module bolts to specified torque.

  Tightening torque 

  Rear side air bag (inflator) module bolt (a): 10 N.m (1.0 kg-m, 7.4 lbf-ft) 

  Fig 1: Identifying Rear Side Air Bag (Inflator) Module Bolt

  Courtesy of SUZUKI OF AMERICA CORP.
• Enable air bag system. Refer to ENABLING AIR BAG SYSTEM