Front Side Air Bag (Inflator) Module Removal and Installation: Removal

1. Disable air bag system. Refer to DISABLING AIR BAG SYSTEM 
2. Disconnect front side air bag harness connector (1).
   Fig 1: Identifying Front Side Air Bag Harness Connector

   Courtesy of SUZUKI OF AMERICA CORP.
3. Remove fitting item (1) at bottom part of backboard (2) and turn over bottom part of backboard.
4. Remove screws (3) and remove backboard.
   Fig 2: Removing Fitting At Bottom Part Of Backboard

   Courtesy of SUZUKI OF AMERICA CORP.
5. Remove nut (1) and remove brackets (2).
6. Remove hook (3) of back trim and turn over back trim.
   Fig 3: Identifying Brackets, Nut And Back Trim Hook

   Courtesy of SUZUKI OF AMERICA CORP.
7. Disconnect front side air bag (inflator) module connector (1) as show in figure.
   1. Release lock (2).
   2. Disconnect connector with lock released.
8. Remove side air bag (inflator) module nuts (4) and remove side air bag (inflator) module (3).

Fig 4: Disconnecting Front Side Air Bag (Inflator) Module Connector

Courtesy of SUZUKI OF AMERICA CORP.