LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Repair Instructions >> HVAC Unit Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HVAC Unit Removal and Installation: Removal

  1. Recover refrigerant from A/C system. Refer to "RECOVERY " in Operation Procedure for Refrigerant Charge  .
  2. Drain engine coolant. Refer to COOLING SYSTEM DRAINING
  3. Remove hose bands (1), and then disconnect heater hoses (2) from HVAC unit.
  4. Remove liquid pipe bolt (3), and then disconnect suction hose (4) and liquid pipe (5) from expansion valve (6).
    Fig 1: Identifying Hose Bands, Heater Hoses, Liquid Pipe Bolt, Suction Hose, Liquid Pipe, Expansion Valve And HVAC Unit
    G06526714Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove right side cowl top garnish, see FRONT FENDER COVER/COWL TOP GARNISH REMOVAL AND INSTALLATION .
  6. Remove nuts (1).
    Fig 2: Identifying Cowl Top Garnish Nuts
    G06526715Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove center console box, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
  8. Remove instrument panel with steering support member, see INSTRUMENT PANEL REMOVAL AND INSTALLATION .
  9. Remove nut (1) and rear duct (2), and then remove HVAC unit (3).
Fig 3: Identifying Nut, Rear Duct And HVAC Unit
G06526716Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals