Air Flow Control Actuator Removal and Installation: Installation

Reverse removal procedure noting the following points.

• Make sure protrusions (2) on links fits into grooves (1) on arm.
• When installing actuator link cover, make sure protrusion (4) on HVAC unit fits into installation hole (3) on actuator link cover.
  Fig 1: Installing HVAC Unit Into Installation Hole On Actuator Link Cover

  Courtesy of SUZUKI OF AMERICA CORP.
• When installing air flow control actuator, make sure protrusion (1) on actuator link cover fits into installation hole on air flow control actuator (2).
  Fig 2: Identifying Air Flow Control Actuator And Actuator Link Cover

  Courtesy of SUZUKI OF AMERICA CORP.