LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Repair Instructions >> A/C Refrigerant Pressure Sensor and Its Circuit Inspection >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

  1. Connect manifold gauge set to charging valves.

    Special Tool 

    : 09990-06020 

  2. Connect scan tool to DLC and display "Refrigerant Pressure" in "Data list" mode on SUZUKI scan tool.
  3. When A/C switch is at OFF, compare pressure [B] of high pressure gauge and pressure [A] displayed on SUZUKI scan tool.
  4. Start engine and operate A/C system.
  5. Check that the relation between pressure [B] and pressure [A] shows such characteristic as shown in the illustration.

    If check result is not satisfactory, replace A/C refrigerant pressure sensor.

    Fig 1: A/C Refrigerant Pressure Sensor Characteristic Graph
    G06526734Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals