A/C Compressor Assembly Removal and Installation: Installation

Reverse removal procedure noting the following points.

• Apply specified compressor oil to new O-ring

  : Compressor oil 99000-99022-00E (Compressor oil (DH-PS, 250cc)) 

• Tighten A/C compressor mounting bolts in numerical order ("1" through "3") to specified torque as shown in the illustration.

  Tightening torque 

  A/C compressor mounting bolt (a): 25 N.m (2.5 kg-m, 18.5 lbf-ft) 

  Fig 1: Identifying A/C Compressor Mounting Bolts And Tightening Sequence

  Courtesy of SUZUKI OF AMERICA CORP.
• If A/C compressor is replaced, pour new compressor oil. Refer to "REPLENISHING COMPRESSOR OIL " in Operation Procedure for Refrigerant Charge  .
• Evacuate and charge A/C system. Refer to "EVACUATION " and "CHARGE " in Operation Procedure for Refrigerant Charge  .