LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Diagnostic Information and Procedures >> DTC Clearance >> Not Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not Using SUZUKI Scan Tool

  1. Display history DTC on VFD refer to "NOT USING SUZUKI SCAN TOOL " under DTC CHECK .
  2. Make sure that DTC and fan mark (1) are displayed.
  3. Push "OFF" switch (2) and "MODE" switch (3) simultaneously for several seconds.
  4. After completing clearance, "CLr" (4) is displayed.
    Fig 1: Identifying Fan Mark, Off Switch And Mode Switch
    G06526690Courtesy of SUZUKI OF AMERICA CORP.
  5. Check that no DTC is displayed on VFD, see DTC CHECK .
scientia non olet · About LEMON Manuals