Intermediate Shaft Disassembly and Reassembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove oil seal (1) and snap ring (2) from transfer right case (3).

Fig 1: Identifying Oil Seal, Snap Ring And Transfer Right Case
Courtesy of SUZUKI OF AMERICA CORP.
Tap intermediate shaft (1) from transfer left case (2) side with plastic hammer (3) and remove it together with bearing.

Fig 2: Tapping Intermediate Shaft From Transfer Left Case
Courtesy of SUZUKI OF AMERICA CORP.
Remove circlip (1) from intermediate shaft (2).
Remove intermediate shaft bearing (5) from intermediate shaft by using bearing puller (3) and hydraulic press (4).

Fig 3: Removing Intermediate Shaft Bearing From Intermediate Shaft

Courtesy of SUZUKI OF AMERICA CORP.