LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Instrumentation/Driver Info./Horn) >> Repair Instructions >> Instrument Panel Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Instrument Panel Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable air bag system, see DISABLING AIR BAG SYSTEM .
  2. Remove floor console front panel, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
  3. Remove front pillar trim, see TRIM REMOVAL AND INSTALLATION .
  4. Remove dash side trim and side sill front scuff, see TRIM REMOVAL AND INSTALLATION .
  5. Remove driver side instrument panel undercover (2), and then disconnect connector (1) while supporting it.
    Fig 1: Identifying Driver Side Instrument Panel Undercover And Connector
    G06529055Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove screws (1) and remove steering column hole cover (2).
    Fig 2: Identifying Steering Column Hole Cover And Screws
    G06529056Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove steering column assembly, see STEERING COLUMN REMOVAL AND INSTALLATION .
  8. Remove screws (1) and remove glove box (2).
    Fig 3: Identifying Glove Box And Screws
    G06529057Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove screws (1) to detach instrument panel undercover (3), and then disconnect floor light connector while supporting it.
    Fig 4: Identifying Instrument Panel Undercover And Screws
    G06529058Courtesy of SUZUKI OF AMERICA CORP.
  10. Remove foot duct, see BLOWER MOTOR REMOVAL AND INSTALLATION .
  11. Remove steering support member lower bracket bolts (1) and remove steering support member lower bracket (2).
    Fig 5: Identifying Steering Support Member Lower Bracket Bolts And Steering Support Member Lower Bracket
    G06529059Courtesy of SUZUKI OF AMERICA CORP.
  12. Disconnect/remove the following parts as shown in figure: connectors (1) to (18), ground connections (19) and inside air temperature sensor aspirator duct (20).
    Fig 6: Identifying Connectors, Ground Connections And Inside Air Temperature Sensor Aspirator Duct
    G06529060Courtesy of SUZUKI OF AMERICA CORP.
  13. Remove steering support member bolts (1) and (2).
  14. Check that there is no harness or ground wire connected between instrument panel and vehicle while slightly raising and supporting instrument panel (3).
  15. Remove instrument panel, steering support member and instrument panel harness as assembly.
    Fig 7: Identifying Steering Support Member Bolts And Instrument Panel
    G06529061Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals