LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> DTC C1122/C1161/C1162/: Engine Speed Signal Malfunction/CAN Invalid Data from Vehicle Speed/CAN Invalid Data from Engine Speed >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This code is indicated when engine is not running during DTC check. There is nothing abnormal if indication changes to a normal one when engine is started.
DIAGNOSTIC PROCEDURE CHART

Step Action YES NO
1  Was "P/S System Check" performed?  Go to Step 2. Go to P/S SYSTEM CHECK .
2  DTC Check 
  1. Check DTC for ECM, see DTC Check .

Is there any DTC(s) detected? 		 Go to troubleshooting for applicable DTC. (ECM-related faulty) Substitute a known-good P/S control module and recheck DTC, see P/S Control Module Removal and Installation .
scientia non olet · About LEMON Manuals