LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P1818: Stepper Motor Performance >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
  • Confirm that the following conditions are met in this procedure.
    • Battery voltage > 10.5 V
  1. Drive vehicle at more than 50 km/h (31 mile/h) for 10 sec.
  2. Stop vehicle.
  3. Push engine switch to change ignition mode to "OFF", and leave ignition mode in "OFF" for 10 sec.
  4. Push engine switch to change ignition mode to "ON".
  5. Repeat Step  1) through  2) twice.
scientia non olet · About LEMON Manuals