LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0722: Output Speed Sensor Circuit No Signal >> DTC Detecting Condition and Trouble Area
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTING CONDITION CHART

DTC detecting condition Trouble area
DTC P0722: Output Speed Sensor Circuit No Signal 
This DTC is detected if any one of the following conditions is met.
  • The secondary pulley speed is lower than 150 rpm for 5 sec. in a row when the primary pulley speed is higher than 1000 rpm.
  • The secondary pulley speed is 0 rpm for specified times when the vehicle speed is higher than 10 km/h (6 mile/h).

(1 D/C detection logic)
  • Secondary pulley speed sensor and/or its circuit
  • TCM
scientia non olet · About LEMON Manuals