Shock Absorber Disassembly and Reassembly: Reassembly

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse disassembly procedure, noting the following points.

Direct rear shock absorber support mount and rear shock absorber washer as shown.
Tighten rear shock absorber support cap bolt and rear shock absorber nut to specified torques.
Tightening torque

Rear shock absorber support cap bolt: 50 N.m (5.1 kg-m, 37.0 lbf-ft)

Rear shock absorber nut: 30 N.m (3.1 kg-m, 22.5 lbf-ft)