Rear Stabilizer Bar Components

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not damage ball stud boots of rear stabilizer ball joints.
Install each rear stabilizer bar mount with its end closely fitted against inner end of corresponding ring on rear stabilizer bar.

NOTE: Hold ball stud of rear stabilizer ball joint with hexagon wrench when removing or installing rear stabilizer bar joint nut.

Fig 1: Identifying Rear Stabilizer Bar Components

Courtesy of SUZUKI OF AMERICA CORP.