LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Air Conditioning System) >> Diagnostic Information and Procedures >> DTC B1502-H: Inside Air Temperature Sensor and/or Its Circuit Malfunction >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLESHOOTING CHART

Step Action YES NO
1  Scan tool parameter check 
  1. Check "Cabin Temperature" using "Data list" mode on SUZUKI scan tool, see Scan Tool Data .

Is temperature below -40 °C (-40 °F)? 		 Go to Step 2. Intermittent trouble.
2  Inside air temperature sensor signal circuit check 
  1. Disconnect inside air temperature sensor connector.
  2. Connect "LT GRN/RED" and "LT GRN/BLK" wire terminals of inside air temperature sensor connector using service wire.
  3. Check "Cabin Temperature" using "Data list" mode on SUZUKI scan tool.

Is temperature below -40 °C (-40 °F)? 		 Go to Step 3. Replace inside air temperature sensor.
3  Inside air temperature sensor signal circuit check 
  1. Connect "LT GRN/RED" and "LT GRN/BLK" wire terminals of "G20" connector using service wire.
  2. Check "Cabin Temperature" using "Data list" mode on SUZUKI scan tool.

Is temperature below -40 °C (-40 °F)? 		 Replace HVAC control module and recheck DTC. "LT GRN/RED" or "LT GRN/BLK" wire open.
scientia non olet · About LEMON Manuals