Flywheel/Drive Plate Removal and Installation: Installation
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal procedure noting the following points:
- Install new flywheel bolts or drive plate bolts.
- Wedge a special tool in ring gear teeth to lock flywheel or drive plate as shown in figure.
Special Tool
- 09924-17811
- Tighten flywheel bolts or drive plate bolts to specified torque.
Tightening torque
Flywheel bolt (a): 70 N.m (7.1 kg-m, 52.0 lbf-ft)
Drive plate bolt (a): 70 N.m (7.1 kg-m, 52.0 lbf-ft)