LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine General Information And Diagnosis) >> Diagnostic Information and Procedures >> DTC P2195/P2196 >> DTC Detecting Condition and Trouble Area
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTING CONDITION CHART

DTC detecting condition Trouble area
P2195: O2 Sensor Signal Biased/Stuck Lean (Sensor 1) 
A/F mixture output from A/F sensor is lean state for 10 sec. even if HO2S signal circuit is higher than 0.2 V (rich state).
(2 D/C detection logic)
  • A/F sensor and/or its circuit
  • ECM
P2196: O2 Sensor Signal Biased/Stuck Rich (Sensor 1) 
A/F mixture output from A/F sensor is rich state for 10 sec. even if HO2S signal circuit is lower than 0.7 V (lean state).
(2 D/C detection logic)