Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Drive shaft nut* | 250 | 25.5 | 184.5 |
| Rear wheel hub assembly bolt | 75 | 7.6 | 55.5 |
| Rear wheel hub assembly bolt | 75 | 7.6 | 55.5 |
NOTE:
The specified tightening torque is described in the following.
REAR DRIVE SHAFT COMPONENTS:REAR
REAR WHEEL HUB AND SUSPENSION KNUCKLE COMPONENTS:REAR
REAR DRIVE SHAFT COMPONENTS:REAR
REAR WHEEL HUB AND SUSPENSION KNUCKLE COMPONENTS:REAR
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .