Brake Hose and Pipe Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: BRAKE HOSE AND PIPE INSPECTION

Reverse removal procedure, noting the following points.

Install brake pipe clamps properly, see BRAKE HOSE AND PIPE COMPONENTS .
Make sure that steering wheel is in straight-forward position and flexible hoses are not twisted or kinked.
Make sure that flexible hoses do not contact any part of suspension, when steering wheel is turned fully right and left. (Fill brake fluid to specified level in reservoir.)
Bleed air from brake system, see Air Bleeding of Brake System .
Make sure that brake system works accurately and there is no fluid leakage.