LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Brake Control System And Diagnosis) >> Repair Instructions >> Brake Booster Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Booster Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove following parts.
  2. Disconnect brake pipes from ESP® hydraulic unit/control module assembly and from brake master cylinder assembly, see BRAKE HOSE AND PIPE COMPONENTS .
  3. Remove brake master cylinder assembly from brake booster, see Brake Master Cylinder Assembly Removal and Installation .
  4. Disconnect vacuum hose from brake booster, see BRAKE BOOSTER COMPONENTS .
  5. Disconnect brake light switch connector.
  6. Remove push rod clevis pin.
  7. Remove brake booster nuts to remove brake booster from dash panel.
scientia non olet · About LEMON Manuals