Passenger Air Bag (Inflator) Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure, noting the following points.

Lock connector for air bag (inflator) module securely.
Fit claw (2) of passenger air bag (inflator) module (1) to instrument panel securely.
Tighten passenger air bag (inflator) module bolts to specified torque.
Tightening torque

Passenger air bag (inflator) module bolt (a): 23 N.m (2.3 kg-m, 17.0 lbf-ft)

Fig 1: Identifying Passenger Air Bag (Inflator) Module With Claw And Bolts
Enable air bag system.