LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Electronic Stability Program) >> Diagnostics Information and Procedures >> ESP® Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON" >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ESP® Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON": Notes

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
PARAMETER INFORMATION REFERENCE

Stability Control (ON, OFF)  This parameter informs whether active brake is operated or not when vehicle is over or understeering.
Hill Hold Control (ON, OFF)  This informs whether active brake is operated or not when vehicle is on upslope.
TCSS Control (Brake) (ON, OFF)  This informs whether active brake is operated or not when vehicle is accelerating.
TCSS Control (Engine) (ON, OFF)  This informs whether engine torque control is operated or not when vehicle is accelerating.