Throttle Motor Check
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect connector from electric throttle body assembly with ignition mode of keyless push start system in "OFF".
- Measure resistance between terminals "1" and "2" of throttle body assembly.
If faulty condition is found, replace electric throttle body assembly, see THROTTLE BODY ASSEMBLY REMOVAL AND INSTALLATION .
Throttle motor resistance
0.3 - 100 Ω at 20°C (68°F)