A/F Sensor and HO2S Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
To avoid danger of being burned, do not touch exhaust system when system is hot.
A/F sensor and HO2S removal should be performed when system is cool.
A/F sensor and HO2S removal should be performed when system is cool.
- Disconnect negative (-) cable at battery.
- Disconnect connector of A/F sensor and/or HO2S.
- Remove exhaust manifold cover, see EXHAUST SYSTEM COMPONENTS .
- Remove A/F sensor (1) and/or HO2S (2).