Front Bumper Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following point.

Tighten front bumper upper bolts and front bumper lower cover bolts to specified torque.
Tightening torque

Front bumper upper bolt: 5.5 N.m (0.56 kg-m, 4.0 lbf-ft)

Front bumper lower cover bolt: 5.5 N.m (0.56 kg-m, 4.0 lbf-ft)