DTC Confirmation Procedure
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
- Select a level road with no traffic to minimize the risk of accident.
- Perform the test extremely carefully.
- Perform the road test using 2 persons, a driver and an assistant.
NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- DTC P0102, P0103, P0131, P0132, P0137, P0138, P0171, P0172 or P2237 is not detected.
- Connect scan tool with ignition mode of keyless push start system in "OFF".
- Warm up engine to normal operating temperature.
- Drive vehicle at 100 km/h (62 mile/h) for 10 min.