LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information & Diagnosis >> Diagnostic Information and Procedures >> DTC P0171/P0172: System Too Lean/System Too Rich >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
  • Select a level road with no traffic to minimize the risk of accident.
  • Perform the test extremely carefully.
  • Perform the road test using 2 persons, a driver and an assistant.
NOTE:
  • Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
  • Confirm that the following conditions are met in this "DTC Confirmation Procedure".
    • BARO > 75 kPa (0.8 kgf/cm2 , 10.8 psi, 0.75 bar)
    • DTC P0102, P0103, P0131, P0132 or P2237 is not detected.
  1. Warm up engine to normal operating temperature.
  2. Drive vehicle at 50 - 60 km/h (31 - 37 mile/h) for 3 min. (Keep throttle valve opening constantly in this step.)