LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Repair Instructions >> Fuel Injector Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Removal and Installation: Removal

  1. Relieve fuel pressure, see FUEL PRESSURE RELIEF PROCEDURE .
  2. Disconnect negative (-) cable from battery.
  3. Remove engine cover.
  4. Disconnect PCV valve hose, see CYLINDER HEAD COVER REMOVAL AND INSTALLATION .
  5. Disconnect ignition coil connectors and fuel injector connectors.
  6. Remove clamp of engine harness from fuel delivery pipe.
  7. Remove fuel pipe stopper (1) and disconnect fuel feed pipe (3) from fuel delivery pipe (2), see FUEL HOSE DISCONNECTING AND RECONNECTING  .
  8. Remove fuel delivery pipe (2).
  9. Remove fuel injector(s) (4).
    Fig 1: Identifying Fuel Pipe Stopper, Fuel Feed Pipe And Fuel Delivery Pipe
    G06526537Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals