LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Differential >> Repair Instructions >> 4WD Control Module Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

4WD Control Module Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove trunk room right side trim, see TRIM REMOVAL AND INSTALLATION .
  3. Disconnect connector (1) from 4WD control module (2).
  4. Remove 4WD control module.
    Fig 1: Identifying 4WD Control Module
    G06528471Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals