LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> Diagnostic Information and Procedures >> DTC B1169: Registered Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DIAGNOSIS PROCEDURE

Step Action YES NO
DTC check 
Is there any DTC(s) other than B1169 detected? 
Go to troubleshooting for applicable DTC. Go to Step 2.
ECM registration 
  1. Perform "ECM Registration".
  2. Confirm that ignition mode of keyless push start system is "OFF".
  3. Push engine switch to change ignition mode to "ON".
  4. Recheck DTC.

Is DTC B1169 still detected? 
Replace ECM and recheck DTC, see ECM REMOVAL AND INSTALLATION . Replace keyless start control module and recheck DTC, see KEYLESS START CONTROL MODULE REMOVAL AND INSTALLATION .