Adjustment Knob Check

Check resistance between terminal "9" and terminal "12" with adjustment knob (6) set at each position. If check result is not as specified, replace wiper and washer switch.

Wiper interval adjustment switch resistance

WIPER INTERVAL ADJUSTMENT SWITCH POSITION REFERENCE

Wiper interval adjustment switch position	Resistance value
1	Approx. 0 kΩ
2	Approx. 2 kΩ
3	Approx. 5 kΩ
4	Approx. 8 kΩ
5	Approx. 10 kΩ

Fig 1: Identifying Adjustment Knob Connector Terminals

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying Adjustment Knob Positions

Courtesy of SUZUKI OF AMERICA CORP.