Wiper Motor Removal and Installation: Installation

Reverse removal procedure noting the following points.

• Tighten wiper motor bolts in numerical order ("1" through "3") to specified torque.

  Tightening torque 

  Wiper motor bolt (a): 8.3 N.m (0.85 kg-m, 6.5 lbf-ft) 

  Fig 1: Identifying Wiper Motor Bolt In Tightening Sequence

  Courtesy of SUZUKI OF AMERICA CORP.
• Install wiper arms (1) in positions shown in figure and tighten wiper arm nuts to specified torque.

  Tightening torque 

  Wiper arm nut (a): 20 N.m (2.0 kg-m, 15.0 lbf-ft) 

  Fig 2: Identifying Wiper Arms Installation Positions

  Courtesy of SUZUKI OF AMERICA CORP.