LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Communication System >> Diagnostic Information and Procedures >> Troubleshooting For Communication Bus Off >> Communication Check >> TCM (CVT model)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM (CVT model)

  1. Push engine switch to change ignition mode to "OFF".
  2. Connect "E19" connector to TCM.
  3. Push engine switch to change ignition mode to "ON".
  4. Select "Communication Bus Check" under "Bus Check" menu of SUZUKI scan tool.
  5. Confirm the CAN communication that control modules, sensors and TCM have been already connected on is in normal condition. Refer to JUDGMENT OF COMMUNICATION BUS CHECK 
  6. If any malfunction is found, substitute a known-good TCM and recheck DTC, see TRANSMISSION CONTROL MODULE (TCM) REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals