LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Repair Instructions >> Secondary Pulley Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Pulley Speed Sensor Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove air cleaner assembly, see AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
  3. Disconnect connector from secondary pulley speed sensor.
  4. Remove secondary pulley speed sensor (2) from transaxle by removing secondary pulley speed sensor bolt (1).
scientia non olet · About LEMON Manuals