LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Specifications >> Tightening Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Torque Specifications

TIGHTENING TORQUE SPECIFICATIONS

Fastening part Tightening torque
N.m kgf-m lbf-ft
Control rod lock nut 75 7.6 55.5
Lower arm lock nut 75 7.6 55.5
Rear shock absorber support bolt 60 6.1 44.5
Rear shock absorber lower bolt 50 5.1 37.0
Rear shock absorber support cap bolt 40 4.1 29.5
Rear shock absorber nut 30 3.1 22.5
Control rod nut 75 7.6 55.5
Trailing arm front bolt 65 6.6 48.0
Trailing arm rear bolt 80 8.2 59.0
Parking brake cable guide bolt 25 2.5 18.5
Lower arm nut 75 7.6 55.5
Upper arm nut (on rear suspension frame side) 75 7.6 55.5
Rear suspension frame front nut 110 11.2 81.5
Rear suspension frame rear bolt 110 11.2 81.5
Upper arm nut (on suspension knuckle side) 75 7.6 55.5
Rear suspension frame front bar bolt 65 6.6 48.0
Rear suspension frame front bar nut 110 11.2 81.5
Wheel speed sensor bracket bolt 25 2.5 18.5
Rear stabilizer bar joint nut 40 4.1 29.5
Rear stabilizer bar mount nut 40 4.1 29.5
Rear stabilizer bracket mount bolt 50 5.1 37.0
NOTE: The specified tightening torque is described in the following.

Reference: 

For the tightening torque of fastener not specified in this section, refer to :