LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel & Column >> Repair Instructions >> Steering Wheel Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Wheel Removal and Installation: Removal

  1. Set steering wheel in straight-ahead position.
  2. Disconnect negative (-) cable at battery.
  3. Disable air bag system, see DISABLING AIR BAG SYSTEM .
  4. Remove driver air bag (inflator) module from steering wheel, see DRIVER AIR BAG (INFLATOR) MODULE REMOVAL AND INSTALLATION .
  5. Disconnect steering switch connector.
  6. Remove steering wheel nut and put matchmark (1) on steering wheel and shaft.
    Fig 1: Identifying Matchmark On Steering Wheel
    G06526638Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove steering wheel using special tool (A).

    Special Tool 

    1. 09944-36011 
    Fig 2: Removing Steering Wheel Using Special Tool
    G06526639Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals