LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Repair Instructions >> A/C Compressor Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Compressor Assembly Removal and Installation: Removal

  1. Recover refrigerant from A/C system. Refer to "RECOVERY " in Operation Procedure for Refrigerant Charge  .
  2. Disconnect negative (-) cable at battery.
  3. Remove right side engine undercover.
  4. Remove accessory drive belt, see ACCESSORY DRIVE BELT REMOVAL AND INSTALLATION .
  5. Disconnect magnet clutch connector (1).
  6. Disconnect suction hose (3) and discharge hose (4) from A/C compressor (2).
    CAUTION: Using caps, seal open fittings immediately to keep moisture and foreign matter out of the system.
  7. Remove A/C compressor mounting bolts (5), and then remove A/C compressor.
    Fig 1: Identifying Magnet Clutch Connector, Suction Hose, Discharge Hose, A/C Compressor And A/C Compressor Mounting Bolts
    G06526772Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals