Back Up Light Switch Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Apply transaxle oil to new O-ring (1) and tighten back up light switch (2) to specified torque.
Tightening torque

Back up light switch (a): 19 N.m (1.9 kg-m, 14.0 lbf-ft)

Fig 1: Identifying O-Ring And Back Up Light Switch
Courtesy of SUZUKI OF AMERICA CORP.
Connect back up light switch connector.
Install battery bracket, battery tray with ECM and battery, see BATTERY REMOVAL AND INSTALLATION .