Windshield Removal and Installation: Preparation
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
ITEM REFERENCE
| Item to be prepared | Usage |
|---|---|
| Eyeleteer | Drilling hole in adhesive |
| Piano string and wood stick (or commercial windshield knife) | Cutting adhesive |
| Knife | To cut off adhesive for finishing |
| White gasoline and gauze | To degrease and clean adhesive surface |
| Caulking gun | To apply adhesive |
| Rubber sucker grip | To hold glass |
| Adhesive (Yokohama Rubber WS-95K, 202 or equivalent) | To bond glass |
| Primer for glass (Yokohama rubber MS-90K or equivalent) | To pretreat adhesive surface |
| Primer for adhesive surface (Yokohama rubber RC-50E or equivalent) | To pretreat adhesive surface |
| Masking tape | Protection against scratch |
| Alcohol | To degrease knife |
| Adhesive tape | To secure windshield molding |