Rear Window Regulator Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: REAR WINDOW REGULATOR ASSEMBLY INSPECTION

Reverse removal procedure noting the following points.

Apply grease to sliding parts of rear window regulator assembly.
: Grease 99000-25011 (SUZUKI Super Grease A)
Tighten rear window regulator bolts in order ("1" to "2") to specified torque.
Tightening torque

Rear window regulator bolt (a): 8.4 N.m (0.86 kg-m, 6.5 lbf-ft)

Fig 1: Identifying Rear Window Regulator Bolts Tightening Sequence
Courtesy of SUZUKI OF AMERICA CORP.
Tighten each part to specified torque referring to REAR DOOR COMPONENTS .