Front Door Glass Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Lower front door glass to about 30 mm (1.18 in) from the lower edge of window.
Disconnect negative (-) cable at battery.
Remove inside handle cap (1) and trim cap (2).
Remove screws (3), clips, and remove door trim (4) by pulling it toward you.
Disconnect connectors of door harness.

Fig 1: Identifying Inside Handle Cap, Screws, Clips, Door Trim And Trim Cap
Courtesy of SUZUKI OF AMERICA CORP.
Remove front outer weather-strip (1) by moving it in arrow directions in order ("1" to "2") as shown in figure.

Fig 2: Removing Front Outer Weather-Strip
Courtesy of SUZUKI OF AMERICA CORP.
Remove door sealing cover (1).

Fig 3: Identifying Door Sealing Cover
Courtesy of SUZUKI OF AMERICA CORP.
Remove screws (1) and remove front door glass (2) by moving it in arrow directions in order ("1" to "2") as shown in figure.

Fig 4: Removing Front Door Glass
Courtesy of SUZUKI OF AMERICA CORP.