Trunk Lid Latch Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following points.

Tighten trunk lid latch bolts to specified torque.
Tightening torque

Trunk lid latch bolt: 4.5 N.m (0.46 kg-m, 3.5 lbf-ft)
Adjust trunk lid latch striker as follows if necessary.
1. Remove tail end trim cap (1).
2. Loosen trunk lid latch striker bolts (2)
3. Adjust trunk lid latch striker (3) position so that trunk lid can be opened and closed smoothly.
4. Tighten trunk lid latch striker bolts to specified torque.
  Tightening torque
  
  Trunk lid latch striker bolt: 4.5 N.m (0.46 kg-m, 3.5 lbf-ft)
  
  Fig 1: Identifying Tail End Trim Cap, Trunk Lid Latch Striker Bolts And Trunk Lid Latch Striker
  Courtesy of SUZUKI OF AMERICA CORP.