LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Wipers/Washers) >> Repair Instructions >> Rain/Light Sensor Removal and Installation (If Equipped) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rain/Light Sensor Removal and Installation (If Equipped): Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove harness cover, see REAR VIEW MIRROR REMOVAL AND INSTALLATION .
  2. Disconnect rain/light sensor connector (1).
    Fig 1: Identifying Rain/Light Sensor Connector
    G06529098Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove rain/light sensor by pushing claw (1) with flat-end screwdriver.
    Fig 2: Identifying Rain/Light Sensor Claw
    G06529099Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove silicone sheet (1).
    Fig 3: Identifying Silicone Sheet
    G06529100Courtesy of SUZUKI OF AMERICA CORP.