LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Wipers/Washers) >> Repair Instructions >> Rain/Light Sensor Removal and Installation (If Equipped) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rain/Light Sensor Removal and Installation (If Equipped): Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install silicone sheet on rain/light sensor.
    NOTE: Be careful not to let air bubbles or dirt stuck in between silicone sheet and windshield.
  2. Install rain/light sensor on windshield, and connect connector.
    NOTE: Be careful not to let air bubbles or dirt stuck in between silicone sheet and rain/light sensor.
  3. Install harness cover.
  4. Initialize rain/light sensor, see below.
scientia non olet · About LEMON Manuals